PRODUCT

ST Series Refrigeration Air Dryer

Capacity range :100~550 m3/min
Working pressure : ≤ 1.0MPa (10barg)
Max. inlet temperature : 50℃
Max. ambient temperature : 45℃
Min. ambient temperature : 5℃
Max. cooling water temperature : 35℃
Cooling type : air-cooled / water-cooled
Power supply : 380V/3Ph/50Hz or 60 Hz
Refrigerant : R407C 

Rated condition :
Working pressure : 0.7MPa,
Inlet temp : 38℃
Ambient temp : 38℃
Cooling water temperature : 30℃
PDP : 2-10 ℃

Other :
For pressure of < 1.0MPa or > 0.4MPa
please contact us

Safe and reliable
Adopt superior quality compressor and set multiple protection.
Patented WS water separator ensures super dew point.
Essential components are international famous brand, with high reliability.

Energy saving and environmental protection
Heat exchanger design is based on HTFS of Aspen.
Twisted tape in the heat exchanger pipe can improve heat transfer efficiency.
8~10℃ Temperature difference between inlet and outlet of pre-cooler, which is not only ensure minimum outlet relative humidity, but also stop orifice freezing, and greatly superior to congeneric products.
Pre-cooler recovered more than 90% cooling capacity, and reduced load of evaporator efficiently, so total energy consumption is only 85% of congeneric products.
Environmental protection refrigerant for all range products, which compliance with different environmental laws of different countries.

Various controller types
Mechanical type with trouble alarm is standard configuration.
Options for different requirement: Single chip, PLC, touch screen and etc.
Can meet different requirement from RS485 I/O,Profibus,Modbus,to Ethernet.

Technical Specification of RSLS-100~RSLS-5500 Series Water Cooled Dryers (standard)

Model Rated Flow Power Supply Rated Power Water Connections Water Flow Air Connections Drain Connections Dimensions in mm Weight
RSLS m3/min V/Ph/Hz kW mm t/h mm mm L W H kg
RSLS-800 80.0 380/3/50 11.20 R2〃 12.0 DN150 DN15 2260 1100 2140 1780
RSLS-900 90.0 380/3/50 14.10 R2〃 15.0 DN150 DN15 2400 1200 2100 1850
RSLS-1000 100.0 380/3/50 14.70 R2-1/2〃 15.0 DN150 DN15 2500 1600 1750 2100
RSLS-1200 120.0 380/3/50 18.37 R2-1/2〃 18.0 DN150 DN15 2600 1850 1780 2300
RSLS-1500 150.0 380/3/50 22.05 R2-1/2〃 20.0 DN200 DN15 2750 1850 1900 2680
RSLS-1800 180.0 380/3/50 29.40. R2-1/2〃 24.0 DN200 DN15 2900 1900 1930 3300
RSLS-2000 200.0 380/3/50 36.75. R2-1/2〃 30.0 DN200 DN15 3000 1950 1970 3600
RSLS-2500 250.0 380/3/50 36.75. Rc3〃 32.0 DN250 DN15 3300 2050 2065 4100
RSLS-3000 300.0 380/3/50 44.10. Rc3〃 40.0 DN250 DN15 3500 2120 2200 4800
RSLS-3500 350.0 380/3/50 51.45. Rc3〃 45.0 DN300 DN15 3700 2200 2300 5500
RSLS-4000 400.0 380/3/50 58.8 Rc4〃 52.0 DN300 DN15 (For more details,
PLS contact Risheng)
RSLS-4500 450.0 380/3/50 66.15. Rc4〃 60.0 DN350 DN15
RSLS-5000 500.0 380/3/50 73.50. Rc4〃 65.0 DN350 DN15
RSLS-5500 550.0 380/3/50 93.80 Rc4〃 78.0 DN350 DN15

The air inlet and outlet is flange connection, standard code JB/ T81-94;
Drain outlet for all refrigeration dryers is tapered thread connection.
The dimensions and weights in the above chart are only for reference. Any change of the design won't be informed.


Technical Specification of RSLF-800~RSLF-3000 Series Air Cooled Dryers (standard)

Model Rated Flow Power Supply Rated Power Water Connections Water Flow Air Connections Drain Connections Dimensions in mm Weight
RSLF m3/min V/Ph/Hz kW mm t/h mm mm L W H kg
RSLF-800 80.0 380/3/50 14.03 R2〃 12.0 DN150 DN15 2300 1300 2020 1450
RSLF-900 90.0 380/3/50 19.20 R2〃 15.0 DN150 DN15 2300 1600 2000 1550
RSLF-1000 100.0 380/3/50 22.80 R2-1/2〃 15.0 DN150 DN15 2500 1710 2100 1850
RSLF-1200 120.0 380/3/50 25.00 R2-1/2〃 18.0 DN150 DN15 2900 1750 2200 2100
RSLF-1500 150.0 380/3/50 31.90 R2-1/2〃 20.0 DN200 DN15 3000 1950 2400 3200
RSLF-1800 180.0 380/3/50 38.00 R2-1/2〃 24.0 DN200 DN15 3200 1950 2400 3500
RSLF-2000 200.0 380/3/50 42.00 R2-1/2〃 30.0 DN200 DN15 3500 1950 2500 4000
RSLF-2500 250.0 380/3/50 57.00 Rc3〃 32.0 DN250 DN15 (For more details,
PLS contact Risheng)
RSLF-3000 300.0 380/3/50 67.00 Rc3〃 40.0 DN250 DN15

The air inlet and outlet is flange connection, standard  code JB/T81-94; Drain outlet for all refrigeration dryers is tapered thread connection.
Rated power includes power of fan.
The dimensions and weights in the above chart are only for reference.
Any change of the design won't be informed.
Please contact us for higher flow and working pressure.